Type Of Scaffolding
pci Scaffolding Scaffolding MeaningTypes Of Scaffolding
1. Scaffolding.
Scaffolding is used to the work height 2.5-3 m. When a job is higher then was not used again. Various scaffolding:
pci scaffolding of wood how to make it move faster and transferability. For high scaffolding, remains cannot be set. Usually on the work height is not more than 3 m, for work of greater than 3 m using scaffolding poles.
Pump Jack Scaffolding and as wear a strap Palm fiber rope-style, because it's resistant to heat, water, etc. On bamboo scaffolding had been set in advance, so the height and length cannot be diesel back. Usually, bamboo can be used at work is not more than 3 m, on foot of bamboo is no wearing 2 or 3 pairs.
Iron scaffolding is very practical and efficient because the installation is easy and can be moved about. High iron scaffolding can be tuned to haul away the scaffolding which one another up to 180 cm Board with thick 3 cm.
2. Scaffold Pole.
Scaffold pole is used when the work has reached above 3 m; Scaffolding poles can be made up to 10 m more depending on the needs. Scaffold Pole there are three kinds:
a. Bamboo Scaffolding poles.
In General, bamboo scaffolding used by workers in the field, either in the building or not. The reason is:
Bamboo is easy to come by, powerful, and cheap.
Installation of bamboo scaffolding can be easily disassembled and reassembled without destroying the bamboo.
Pengikatnya materials wear strap-style.
b. System scaffolding bamboo with consoles from the iron.
Bamboo scaffolding system with iron console only held by one pole bamboo only, different from the scaffolding that was detained by several pillars.
Its advantages are:
Not too much is required, bamboo
How to Setup is faster than bamboo scaffolding,
More practical and save you a spot.
Mounting the console can be moved from level 1 kiting at above,
Bamboo pole need not cut,
c. Iron Scaffolding pole or pipe.
On a scaffolding pole from the iron or pipe coupling wear penyambungnya tool, for its tuning faster than bamboo scaffolding poles.
3. Iron Scaffolding Wheel
Iron scaffolding wheel is made from galvanized pipe. On iron, scaffolding wheel can be mounted on the ground or in the room. The function of the vehicle is to move the scaffolding. Iron scaffolding on another bit of wheeled scaffolding, because here the parts of the shaft already shaped frames, so that Setup/installation much easier and practical.
4. The iron Scaffolding without wheels.
The scaffold consists of components; Feet threaded pipes, sills building, a vertical amplifier, a pillar of the backrest, the connection pegs, the stage, the stage is flat, a board seat, backrest, backrest cover pillars, connectivity, consoles, buttresses, the console out, pole pitch of the stairs, a suburb of stairs, stairs, ladders, and the backrest the backrest double.
5. Hanging Scaffold
On a scaffold hanging installation jobs used in plasterboard, the job of finishing painting plasterboard, concrete plates, etc. So hanging scaffold used in the work of the upper part of the course and its implementation suspended scaffolding on the upper part of the building with ropes or chains of iron.
6. Scaffolding Frame
These frames are usually made of metal pipes or tubes. This scaffolding can be designed into a single unity high scaffolding to support the workers in construction activities are located.
7. Scaffolds Dolken
The scaffold is made from wood Tolkien. Round lumber/Tolkien usually used for scaffolding poles and the size typically used is 6 – 10 cm in diameter.